Jaguar Used Auto Parts
In 1922, Bill Lyons joined sidecar builder William Walmsley to form the Swallow Sidecar Company in Blackpool, England. Their stylish, distinctive aluminum sidecars proved popular. In 1927, Lyons crafted the Austin Seven and the Swallow sidecar and Coach building Company was born. The cars had aluminum panels over wooden frames, smart styling cues. They were brightly painted and had affordable prices. Afterwards Sidecar was dropped from the company name and the SS Jaguar 100 was the first to bear the Jaguar name.
Typically mounted in front of the radiator is the Jaguar AC condenser. This allows it to take advantage of the cooler air. It uses the air provided by the fan and the forward motion of the car to cool the refrigerant. The highly pressurized ac refrigerant flows into the Jaguar condenser. The air rushing through the coils of the ac condenser cools the refrigerant back into cool liquid. It then flows back through the evaporator. The jaguar ac condenser has 2 ac condenser hoses coming from either end of unit.
The jaguar V8 S type Sedan a/c condenser is priced at about 190$ while the rate for a Jaguar V6 X type is higher at around 350$.
The Jaguar electronic control unit (ECU) is typically located under one of the seats in the car. It uses a light code system to indicate faults in the system. The ECU of the Jaguar is the brains of the cars fuel injection and ignition system. Jaguar ECU fails when the car is jump-started using cheap jumper cables. These cause the electrical system to surge after the vehicle is started.
Electronic control Units of Jaguars XJ6-40 are priced at around 350$.
The Jaguar brake master cylinder is attached to the brake booster. It allows the driver to apply pressure through the master cylinder to the braking hydraulic system. The brake master cylinder has a plastic brake fluid reservoir attached to the top of the unit. Have the brake fluid completely flushed each year for quality performance of your Jaguar brake master cylinder.
Most Jaguar brake master cylinders cost around 300$ - 350$.
Brake pads are used on vehicles with disc brakes. Jaguar brake pads are located in the brake caliper. The caliper is attached to the front or rear wheel hub assembly. Pressure to the brake rotor is applied by the brake pads which cause the car to stop. Every 6000 thousand miles have your Jaguars brake pads checked. Replace brake pads before the brake material is worn completely off.
A Jaguar 3.8 brake pad set is priced at around 35$ while the cost of a Jaguar V6 brake pad set is reasonably priced at 100$.
The Jaguar shock absorber prevents the formation of tiny air bubbles which reduces the effectiveness of the damping oil. If oil is seeping, either on the outer tube or on the piston rod, the shock absorbers need to be replaced.
Jaguar shock absorbers range from 100$ to 250$ depending on the make.
The Jaguar spark plug introduces ignition energy into the combustion chamber to initiate combustion of the compressed air-fuel mixture. The Jaguar spark plug is instrumental in determining optimal performance and reliable functioning of a jaguar engine.
The ignition coil provides spark to the spark plugs. The ignition coil sends spark to the distributor and then distributes spark to the appropriate spark plug.
Jaguar spark plugs are priced between 10$ to 254 while the cost of ignition coils range approximately from 35$ to 80$.
Numerous online sites provide locating services for used parts. These services are a cost effective and efficient means of obtaining used/ salvaged parts at reasonable prices